netool.io2.1.11 - App Store

This app is meant to work with a Netool network analyzer, find it at http://www.netool.io. This app will not work with any other device.

With a Netool.io handheld network analyzer you can detect ethernet protocols and analyze them.

Netool can detect the following:

-Tagged VLAN IDs
-Untagged VLAN ids (using CDP or LLDP)
-Spanning tree (STP)
-DHCP
-Switch Port (using CDP or LLDP)
-Switch Address (using CDP or LLDP)
-Switch Hostname (using CDP or LLDP)
-LLDP-MED POE Power
-and Perform ping tests to the internet, gateway and a custom address.
-Dark mode

Netool can also share like a good device.

-Share via text, email, slack and more
-Upload your tests to share with other Netool users. (Netool remote cloud)

We are always adding more features to Netool every day with our Over the air update system.

When the app is running in the background the app will chime to let you know that the netool ne1 detected a port.

Pick yours up today at http://www.netool.io

Version History Complete rebuild.

Added iOS local network permissions support.

Added:
-Rebuilt netool.cloud
-Tag history sync to netool.cloud
-Traceroute
-PCAP downloading
-Discovery packet and STP detail menu

Bug fixes and speed improvements. 2.1.11 09/11/2023 Complete rebuild.

Added:
-Rebuilt netool.cloud
-Tag history sync to netool.cloud
-Traceroute
-PCAP downloading
-Discovery packet and STP detail menu

Bug fixes and speed improvements. 2.1.1 09/18/2020 Fixed notifications menu.

Added HTTP/HTTPS Check.
Added "Ping Management IP of a switch".
Fixed an issue with setting the MAC address in the ethernet settings.
Fixed an issue with setting the WiFi name and WEP2 key at the same time.
UI enhancements.
Moved Dark mode toggle into the root setting menu.
Speed enhancements.

Fixed where some times the background sounds would sound twice.

Note: Some functions will not work with App 2.0.8 and any firmware build under 75. 2.0.10 04/04/2020 Additional small bug fixes.

Added HTTP/HTTPS Check.
Added "Ping Management IP of a switch".
Fixed an issue with setting the MAC address in the ethernet settings.
Fixed an issue with setting the WiFi name and WEP2 key at the same time.
UI enhancements.
Moved Dark mode toggle into the root setting menu.
Speed enhancements.

Fixed where some times the background sounds would sound twice.

Note: Some functions will not work with App 2.0.8 and any firmware build under 75. 2.0.9 03/26/2020 Added HTTP/HTTPS Check.
Added "Ping Management IP of a switch".
Fixed an issue with setting the MAC address in the ethernet settings.
Fixed an issue with setting the WiFi name and WEP2 key at the same time. 
UI enhancements.
Moved Dark mode toggle into the root setting menu.
Speed enhancements. 

Fixed where some times the background sounds would sound twice.

Note: Some functions will not work with App 2.0.8 and any firmware build under 75. 2.0.8 03/26/2020 Added notifications to this release.

Add audio to let you know when data has changed on your netool, both in the foreground and background.

Add vibration alerts to let you know when data has changed on your netool, both in the foreground and background.

You can find a notifications menu to under settings (sprocket icon), notifications.

Find more information about this update on our blog (blog.netool.io). 2.0.6 10/24/2019 Fixed an issue where POE class and WATTs was showing when power was disabled in LLDP-MED. 2.0.4 04/24/2019 Speed up tagged VLAN ID querying from the database.
Added LLDP-MED POE detection.
Added LLDP-MED POE class and wattage detection.
Added notes to the history menu.
Improved responsiveness while netool.cloud remote sharing was enabled. 2.0.3 04/19/2019 Bug fixes.
Fixed trunking of switch name and switch distribution.
Added port description. 2.0.2 03/26/2019 Dark mode.
Discovery packet detection speed increase.
EDP, FDP and SONMP Addition.
Flashing port identification.
History menuAbility to edit tagged history names.
Ability to export history as a CSV (share to google drive, email, txt, slack etc..)
AutoSave to History.
Refresh for update menu.
Tag history entry speed increase
General speed improvements.
Additions to switch info via discovery packets.
Auto Negotiation detection.
LLDP-MED Voice VLAN.
Fixed VLAN detection in some environments.
Management over LAN setting.
Packet filters for capture to PCAP mode.
Discovery packet read only mode.
Tagged VLAN detection and STP detection is now turned off by default. You can turn it back on in the settings (sprocket) > toggle switch menu.
Use two netool's to identify a line and or do a simple test of the line. 2.0.1 03/15/2019 Dark mode.
Discovery packet detection speed increase.
EDP, FDP and SONMP Addition.
Flashing port identification.
History menuAbility to edit tagged history names.
Ability to export history as a CSV (share to google drive, email, txt, slack etc..)
AutoSave to History.
Refresh for update menu.
Tag history entry speed increase
General speed improvements.
Additions to switch info via discovery packets.
Auto Negotiation detection.
LLDP-MED Voice VLAN.
Fixed VLAN detection in some environments.
Management over LAN setting.
Packet filters for capture to PCAP mode.
Discovery packet read only mode.
Tagged VLAN detection and STP detection is now turned off by default. You can turn it back on in the settings (sprocket) > toggle switch menu.
Use two netool's to identify a line and or do a simple test of the line. 2.0 03/14/2019 Bug fixes - Ethernet Settings Menu. 1.9.2 10/17/2018 -Fixed a bug where the loading screen decided to hang around longer then welcomed.
-Added automatic ARP scanning and port scanning (requires netool firmware build 62+) 1.9.1 09/23/2018 Added the ability to perform a automatic arp scan, also added the ability to port scan on found IP address via the arp scan. 1.9.0 09/18/2018 Added DHCP Server IP
Added DHCP Domain
Added DHCP Lease time.
Bug fixes.
Fixed host discovery via packet capture. 1.8.5 05/01/2018 Bug fixes and performance increase.
For performance increase, netool firmware version 60 and above is required. 1.8.3 04/12/2018 New feature
-The ability to tag a VLAN on the ethernet interface. This allows DHCP tests on a tagged VLAN and allows the ability to NAT Wi-Fi traffic to the tagged VLAN. Requires Netool Firmware Build 58.

We are constantly updating our app to fix bugs and add features.

-Changed the format and enhanced the behavior of the device discovery menu.
-Fixed resume.
-More bug fixes. 1.8 03/26/2018 Lots of new features. This release requires Netool Firmware build 56 and above.

Features:
-Capture to PCAP file on USB
-NTP client settings
-DHCP indication.
-DHCP release and renew by tapping the refresh icon
-CDP/LLDP Switch Description
-STP details when you tap on the STP icon on the main screen.
-The ability to delete individual tag/history entries.
-Capture duration for the new capture to pcap feature.

Don't have a Netool, grab one at https://netool.io 1.7.1 02/12/2018 Lots of new features. This release requires Netool Firmware build 56 and above.
Features:
-Capture to PCAP file on USB
-NTP client settings
-DHCP indication.
-DHCP release and renew by tapping the refresh icon
-CDP/LLDP Switch Description
-STP details when you tap on the STP icon on the main screen.
-The ability to delete individual tag/history entries.
-Capture duration for the new capture to pcap feature.

Dont have a Netool, grab one at https://netool.io 1.7.0 02/12/2018 iPhone X compatibility.

Bug fixes
Fixed issue with the app not updating after app suspended. 1.6.7 12/18/2017 Small bug fix again.

and

Added Host Discovery mode. Host Discovery mode allows you to plug the Netool into the line going back to a host or device, such as computers, access-points, phones, cameras, etc and detect there MAC address, IP address, VLAN id or OUI Company. Host discovery monitors all packets it can see (UDP, TCP, 802.1x, etc..) for sending MAC address, sending ip address. It also looks up the OUI based on the mac address within the a local database on your phone.

Requires Netool firmware build 48.

Bug fixes
-Special characters not working with wpa2 settings.
-many others.
-animation updates.
-Netool.cloud fix. 1.6.4 05/12/2017 Small bug fix

and

Added Host Discovery mode. Host Discovery mode allows you to plug the Netool into the line going back to a host or device, such as computers, access-points, phones, cameras, etc and detect there MAC address, IP address, VLAN id or OUI Company. Host discovery monitors all packets it can see (UDP, TCP, 802.1x, etc..) for sending MAC address, sending ip address. It also looks up the OUI based on the mac address within the a local database on your phone.

Requires Netool firmware build 48.

Bug fixes
-Special characters not working with wpa2 settings.
-many others.
-animation updates.
-Netool.cloud fix. 1.6.3 05/11/2017 Small bug fix

and

Added Host Discovery mode. Host Discovery mode allows you to plug the Netool into the line going back to a host or device, such as computers, access-points, phones, cameras, etc and detect there MAC address, IP address, VLAN id or OUI Company. Host discovery monitors all packets it can see (UDP, TCP, 802.1x, etc..) for sending MAC address, sending ip address. It also looks up the OUI based on the mac address within the a local database on your phone.

Requires Netool firmware build 48.

Bug fixes
-Special characters not working with wpa2 settings.
-many others.
-animation updates.
-Netool.cloud fix. 1.6.1 05/03/2017 Added Host Discovery mode. Host Discovery mode allows you to plug the Netool into the line going back to a host or device, such as computers, access-points, phones, cameras, etc and detect there MAC address, IP address, VLAN id or OUI Company. Host discovery monitors all packets it can see (UDP, TCP, 802.1x, etc..) for sending MAC address, sending ip address. It also looks up the OUI based on the mac address within the a local database on your phone.

Requires Netool firmware build 48.

Bug fixes
-Special characters not working with wpa2 settings.
-many others.
-animation updates.
-Netool.cloud fix. 1.6 05/02/2017 Added public IP detection.
Added the ability to turn off Gateway ping, Internet ping, and Custom ping (Settings > Toggle Switches).
Added the ability to reboot the Netool via the App (Settings > About).

Requires Netool.io firmware build 47 1.5.5 04/16/2017